Finalit No. 11 Grease and Wax Remover (neutral)

  • Removes stains of grease, milk, oil, 
  • wax, candle wax, food waste and grease rims of silicone joints. 

Use undiluted. 1 l is sufficient for 5 m².

Quantities calculator

Short video Finalit No. 11 Grease and Wax Remover


ATTENTION! Remove any coatings beforehand using Finalit No. 5 Coating Remover!
Siliconise wooden connections on the floor (e.g. doorframes) with transparent silicone. 

ATTENTION! Do not handle with open flames. No smoking. Risk of ignition!

Application areas:

  • Grease / oil / wax / candle wax 
  • Grease rims of silicone joints

Suitable for all natural and artificial stones! You need to make your own tests!

  • Use undiluted
  • 1 l is sufficient for 5 m² 
  • For very heavy stains, preclean with No. 1, cover the area with plastic sheet and let set over night. 
  • Rinse well with water.
  • Make sure to shake No. 11 before using. Apply a layer as thick as a knife with a spatula. 
  • The exposure time is approx. 30 minutes. Multiple applications may be necessary with intensive soiling.
  • Rinse with Finalit No.1 diluted 1:20 with water - neutralise 
  • Then thoroughly wash off with water 
  • You need to make your own tests.
  • Especially suitable for removing candle wax from tombstones!
  • Grease rims of silicone joints (there is no grease-free silicone - even marble silicone (low in grease in itself) sometimes causes grease rims or stains when exposed to heat 
  • Solvent residues frequently appear as grease residues in the stone, allow to dry well 
  • Application is required several times if the surface is impregnated with grease "sweating" 
  • Cover with a plastic film in order to prevent premature drying; the exposure time is approx. 1 hour 
  • 30% No.1 additive, increases the effect and is a replacement for solvents, large-scale application with a machine and silicone brush - no smearing with these brushes as they have stiff bristles!